OEM Mercedes Used 8 Tooth Flush Gear Window Motor for the Left (USA Driver's) Side.
Flush Gear Style where the bottom of the gear is the same elevation as the bolt hole protrusions.
In good working condition when pulled.
Stock photo, may not be exact item pictured.
There are three variations of the 8-tooth motor with different gear heights as compared to the bolt hole protrusions. This is the mid-range height, where the gear sits on a protrusion that is flush with the bolt hole protrusions.
The "Flush" 8-tooth gear motor is used in the following applications:
- Most Front Windows only of W126 Sedans (earliest models used 14 tooth).
- Rear Windows only of W114 Coupes.
- Rear Windows only of C107 Coupes.
Fits C107 Coupe, W114 Coupe, W126 Gen. 1 Sedan, W126 Gen. 2 Sedan Chassis
Please verify fitment in the Vehicle Interchange tab before purchasing.
Fits C107 Coupe, W114 Coupe, W126 Gen. 1 Sedan, W126 Gen. 2 Sedan Chassis
C107 Coupe
1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989
280SLC, 350SLC, 380SLC, 450SLC, 500SLC
W114 Coupe
1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976
250C, 280C
W126 Chassis Gen. 1 Sedan
(1979, 1980 EURO) 1981, 1982, 1983, 1984, 1985
280S, 280SE, 280SEL, 300SD, 380SE, 380SEL, 500SE, 500SEL
W126 Chassis Gen. 2 Sedan
1986, 1987, 1988, 1989, 1990, 1991
260SE, 300SDL, 300SE, 300SEL, 350SD, 350SDL, 420SE, 420SEL, 500SE, 500SEL, 560SE, 560SEL